MIG Welding machine FANMIG 201 LCD MOST

The device is powered from a single-phase 230 V mains. The device uses a PFC (Power Factor Correction) filter. The advantage of inverters with a built-in PFC is higher energy efficiency, lower network load (weaker fuse), greater tolerance to supply current fluctuations and less interference generated by the device.

The wire feeder allows welding with wire from 5 kg / D200 spools. The recommended diameters of steel wires are 0.8 mm and 1.0 mm, for aluminum 1.0 mm. After changing the polarity, you can also use self-shielding cored wires fi 0.8-0.9 mm.

Fanmig 201 LCD can be use for:

▪  Light renovation works

▪  Car body repair

▪ Craftsmanship, making light steel structures

The control panel is equipped with a color LCD display. Parameters are set using two knobs, which are used to select and accept individual functions and their values. The panel is protected against damage by a transparent cover.

Technical parameters:

Power supply: 1x230 V / 50-60 Hz

Wire feeding speed: 1,5 - 17,0 m/min

Rolls: 30/22 (typ Cooptim)

Welding current range

MIG/MAG: 20- 200 A

TIG 10-200 A

MMA 10-200 A

Dimension: 215x540x410 mm

Weight: 17,7 kg

Device assembly: Device is delivered with a mass cable and prepared for welding with a coated electrode, a gas hose and an user manual.

Additional accessories:

M24 SGRIP 3 m Welding Torch 55 08 302430

M24 SGRIP 4 m Welding Torch 55 08 302440

M24 SGRIP 5 m Welding Torch 55 08 302450

M15 SGRIP 3 m Welding Torch 55 08 301530

M15 SGRIP 4 m Welding Torch 55 08 301540

M15 SGRIP 5 m Welding Torch 55 08 301550

TIG 17 4 m F201 Welding Torch 56 03 011115

0.8-1.0 Roll 5113007826

0.6-0.8 Roll 5113007783

Accessories for aluminum welding and brazing (recommended wire diameter 1.0 mm):

1.0 AL-1.2AL Roll 5113007863 

Teflon liners welding torch: 5513013010 (3 m); 5513013020 (4 m); 5513013030 (5 m)